![]() ![]() Work Utility (diff1 shares solved / min): 0.00/min Utility (accepted shares / min): 0.00/min Failed to read errno=0 in usbutils.c usb_resource_thread():3742 gridseed detect (20:30) failed to initialise (incorrect device?) gridseed detect (20:11) failed to initialise (incorrect device?) Gridseed detect (20:30) failed to initialise (incorrect device?) So, I'm stuck again and at your mercy.Īs always, thanks for sticking with me on this! Since my Antminers are working great, I'm actually most interested in getting these running for Scrypt pools. Referenced from: /Applications/MacMiner - Gridseed/MacMiner.app/Contents/Resources/gridseedcpu/bin/minerd Also, I shutdown and rebooted before giving this a try.ĭyld: Library not loaded: /usr/local/lib/libidn.11.dylib API running in IP access mode on port 4048 (24)Īt least it IS seeing the gridseeds so I will count that as progress! But what to do from here? Oh and I did include the manual flags as indicated above. Waiting for USB hotplug devices or press q to quit gridseed detect (20:7) failed to initialise (incorrect device?) gridseed detect (20:8) failed to initialise (incorrect device?) Loaded configuration file /Users/tams/Library/Application Support/MacMiner/nf Network difficulty changed to 68 (488.4Mh/s) Stratum authorisation success for pool 0 HTTP request failed: Protocol stratum tcp not supported or disabled in libcurl Got all miners running in every hole.Loaded configuration file /Users/tams/Library/Application Support/MacMiner/nf I don't know if you need to do all the steps, or if it was something altogether different I did, maybe I just got lucky, but this worked. Right click Zadig > Properties>Compatibility Check box to run in compatibility mode, and drop down box to Windows XP (Service pack 2)Ĥ. Re-installed Zadig for Windows XP ( ) not Zadig for Windows Vista or laterģ. I think it's a windows 7 problem with zadig, because I can use the same miners on my XP box.Ģ. I got them working, and since I haven't seen an answer to this yet, I'll post what I did to fix it. Speeds suck though, best I'm seeing is just under 1 ghs.Īny advice on the zadig problem? I'm using Windows 7 and the correct cgminer version. So I fired up bfgminer, and got all(6) miners working, one at a time. I tried to manually install the driver, but that was way over my head. It keeps saying "driver installation failed". Well, I can't get zadig to replace the drivers from CP210X to WINUSB. This was (as im sure people realise) based heavily off of the adafruit PiMiner tutorial, but im putting it here in one single place so anyone such as me finds it easier to start mining with their Antminers. cgminer/cgminer -config /home/pi/nf -bmsc-options 115200:20 Paste the line below befpore the Exit 0 line in there. Then, I launch with the following line on bootup by typing. You should see CGminer start mining, if you do, press CTRL c to exit. /Press ctrl x to exit, y to save the file and then the Enter key to confirm.\\\ Memcpy((char *)
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |